• Out-of-Stock

Z7M1 REV.1

Off-the-shelf SOM, able to act as the intelligent controller of your carrier board for fast development and fast and secure deployment of production solutions.

Zynq
Speed Grade
Temp. Range
Config.

Volume discounts

Quantity Unit discount You Save
6 3% Up to €40.46
11 8% Up to €197.78
26 12% Up to €701.22
51 20% Up to €2,292.45
101 25% Up to €5,674.94
Qty

 

SOM-MY Z7M1 Rev.1 compatibility with AVNET SILICA SOM and boards.

  1. Full Z7M1 Rev.1 compatibility versus Avnet Silica PicoZed SOM (JX1 / JX2/JX3 connectors) equipped with Xilinx Zynq Z7010 e Z7020
  2. SmartBrain tested his Z7M1 Rev.1 SOM with the PicoZed FMC V2 Carrier Card.
  • FPGA Xilinx Zynq Z7010 or Z7020
  • Microprocessor Cortex A9 Dual Core
  • 1 GB di RAM DDR3
  • 128 MB SPI Flash Memory
  • Dual 12-bit 1 Msps ADC up to 17 Analog Inputs
  • 8KB NFC Tag with I2C Interface *
  • NFC Antenna
  • 100 PL I/0 on JX1/JX2/JX3 connectors to Carrier Board
  • USB High Speed Host and Device
  • Power Supply management for VIN and VCCIO
  • Temperature Range from Commercial (0°C to +85°C) to Automotive (-40°C to +125°C)
  • Speed Grade: -1(667MHz), -2(766MHz), - 3(866MHz)
  • Automotive version available on request
  • Footprint: 4.00" x 2.25" form factor
  • Avnet Picozed compatible
  • Secure element NXP A71CH *
  • Micro-SD connector with automatic-boot feature
  • 8 GB eMMC memory
  • Gigabit Ethernet
  • USB 2.0 VCOM + USB Power Supply
  • PS PMOD I/O on JX2 connector
  • JTAG 7x2 standard connector *
  • VIN Power Supply from USB *
  • Reset button
  • UART –to-USB *
  • Boot selector *

* Development version only

Specific References